Sym HD2 125 Service Manual page 203

13. COOLING SYSTEM
Install the new inner seal onto the right crankcase.
Special tools:
Water pump oil seal driver (inner)
Install a new outside bearing to the right
crankcase cover.
Special tools:
Water pump bearing driver (6901)
Caution
Do not reuse old bearing. It must be replaced
with a new one once it has been removed.
Mount the water pump shaft and the inner bearing
to the right crankcase cover.
Install the circlip to hold the inner bearing.
13-10
To this chapter contents
Water pump bearing
driver (6901)
Inner bearing
Water pump shaft
Water pump oil seal
driver (inner)