Needle Drop - Viking Huskystar 207 Service Manual

Huskystar 207, 215

NEEDLE DROP

To check.
When the needle swings in maximum zigzag width, the distance between both ends of the
needle hole on the needle plate and the needle drop positions should be more than 0.2mm
and equal (C).
If not, adjust as follows:
To adjust.
1. Remove the face cover.
2. Set the stitch selector dial at maximum zigzag width.
3. Loosen the hexagon socket screw (A).
4. Turn the eccentric pin (B) to adjust the needle drop.
5. Tighten the hexagon socket screw (A).
6. Attach the face cover.
Note! Check the hook timing after this adjustment.
( A )
( B )
0,2mm
11