Bartack Feed Of Buttonhole - Viking Huskystar 207 Service Manual

BARTACK FEED OF BUTTONHOLE

If the material is fed forward or backward when sewing the bartack on a buttonhole, adjust as
follows:
To adjust.
1. Set the stitch selector dial
2. Remove the front cover.
3. Place a piece of paper under the foot and turn the hand wheel
4. Turn the adjusting screw (E) in the direction of:
(C) if the paper is fed forward (F).
(D) if the paper is fed backward (G).
5. Attach the front cover.
( F )
18
Huskystar 207, 215
at and the stitch length dial at "4".
( G )
( C ) ( D )
( E )