Gree GWH07AGA-K3NNA1B Service Manual page 96

Service Manual
Step
13. Remove gas valve and liquid valve
Cutting the pipeline of welding the gas valve
and the liquid valve, Remove the screws
fixing the valves, remove the gas valve and
the liquid valve.
Note:
When cutting weld, wrap the valve with wet
cloth completely to avoid damaging the valve
due to high temperature.
14. Remove valve support
Screw off the screws fixing the valve
support and then remove the valve support
15. Remove 4-way valve assy
Cut off the welded pipe of the 4-way valve
component to the condenser assy and
compressor, and then remove the 4-way
valve.
Note:
When cutting weld, wrap the 4-way valve
with wet cloth completely to avoid damaging
the valve due to high temperature.
Installation and Maintenance
Procedure
Capillary
sub-assy
Liquid valve
Screws
Gas valve
Screws
Valve support
Screws
4-way valve assy
93