Gree GWH07AGA-K3NNA1B Service Manual page 86

Service Manual
Steps
12. Remove magnet coil
Remove the screw fixing the magnet coil and then
remove the coil.
13. Remove valves and 4-way valve subassembly
Cut off the welded pipe of the 4-way valve
component to the gas valve ,the condenser assy
and compressor, and then remove the 4-way valve.
Remove the screws fixing the valves, Cutting the
pipeline of welding the gas valve and the liquid
valve, and remove the gas valve and the liquid
valve.
Note:
When cutting weld, wrap the valve with wet cloth
completely to avoid damaging the valve due to
high temperature.
14. Remove compressor
Remove the foot nuts on the compressor and then
remove the compressor.
Installation and Maintenance
Procedure
4-way valv e
foot nuts
magnet coil
liquid valv e
gas valv e
compresso r
83