Gree GWH07AGA-K3NNA1B Service Manual page 81

Step
10. Remove magnetic coil
Remove one screw on magnetic coil, and
then remove the magnetic coil.
11. Remove gas valve and liquid valve
Cutting the pipeline of welding the gas valve
and the liquid valve, Remove the screws
fixing the valves, remove the gas valve and
the liquid valve.
Note:
When cutting weld, wrap the valve with wet
cloth completely to avoid damaging the valve
due to high temperature.
12. Remove 4-way valve assy and capillary sub-assy
Cut off the welded pipe of the 4-way valve
component to the condenser assy and
compressor, and then remove the 4-way
valve.
Note:
When cutting weld, wrap the 4-way valve
with wet cloth completely to avoid damaging
the valve due to high temperature.
Cut off the capillary welded tube to the
condenser and remove the capillary.
78
Procedure
Service Manual
Magnetic coil
Screw
Capillary sub-assy
Liquid valve
Screws
Gas valve
Screws
4-way valve assy
Capillary sub-assy
Installation and Maintenance