Service Manual
GWH18AGD-K3NNA1B/O
Step
1. Remove valve cover
Remove the 2 screws fixing valve cover and
then remove the valve cover.
2. Remove handle
Remove the screw fixing handle; slide out the
handle upwards to make the clasp of handle
separate from the groove of right side plate,
and then remove the handle.
3. Remove top panel
Remove the screws fixing top panel and
then remove the top panel.
Installation and Maintenance
Caution: discharge the refrigerant
completely before removal.
Procedure
Valve cover
Right side plate
Screws
Screws
Handle
Screw
Top panel
Screws
89