Xerox C55/C55mp User Manual page 58

4–16
T H E C O N T R O L
DESIGNATE A TRANSPARENCY TRAY
If the optional Lower Feeder (Tray 2) is installed on your printer, you can
use the following procedures to designate Tray 1 or 2 as the transparency
tray. See "Chapter 3: Print Media."
1. Press the On Line button located on the Control Panel. The
2. Press the Menu button, located immediately below the Message
3. Scroll through the Top Menus, using the Previous and Next buttons
4. Press the Enter button when <MEDIA MENU> is displayed.
5. Scroll through the sub-level menu options, using the Previous and
6. Press Enter when <TRANSPARENCY> is displayed.
7. Scroll to display either <TRAY 1> or <TRAY 2>.
8. Press the Enter button when the tray you want to designate as a
9. Press the On Line button to put the printer back on line again.
P A N E L
<ON LINE> message is cleared, and <OFF LINE> is displayed.
Display Window. The <OFF LINE> message is cleared, and the Top
Menu <CONTROL MENU> is displayed.
until <MEDIA MENU> is displayed.
Next buttons until <TRANSPARENCY> is displayed.
transparency tray is displayed.