How To Clear A Media Jam - Xerox C55/C55mp User Manual

How to Clear A Media Jam

This section describes the media jam areas and gives basic
instructions for clearing jams in each of these areas. Use these
instructions to safely remove jammed media from your printer. The
printer is designed to automatically shut down when a jam occurs,
but will resume your print job at the point at which it was
interrupted after the jam has been cleared.
You can greatly reduce the incidence of media jams by following
these simple guidelines.









NOTE:
diagrams and information that follow to help you locate and remove
transparency jams.
Use media that is in good condition (not torn, wrinkled, or
moist).
Use recommended types, amounts, sizes, and weights of media.
(Refer to "Chapter 3: Print Media.")
Load all media properly, and make sure that it is properly
oriented for printing. (You can also try turning the media over if
jams occur.)
Select the correct Media Type in your printer driver.
A jammed transparency may not be easily visible; use the media jam
T R O U B L E S H O O T I N G
6–11