Adjusting The Adjustable Heel Loop; Adjusting Armrests; Adjusting The Armrest Angle - Invacare Captain's Seat User Manual

Table of Contents

1. Using the mounting screw A, spacer B, washer (not used

on deluxe flip up footplate) C and cap nut D secure the

adjustable heel loop E to the footplate F.

2. Secure the hook G and loop H strips around the

lower footrest tube (I). Refer to Adjusting the

Adjustable Heel Loop.

9.7.3 Adjusting the Adjustable Heel Loop

1. If necessary, pull to release the hook G and loop

H strips securing the adjustable heel loop E to

the lower footrest tube I.

2. Determine the heel loop length and depth appropriate for

the wheelchair user.

A red line J is included on the hook strip to help

indicate when the hook and loop strips overlap by

1-1/2 inches (38 mm) K.

3. Ensuring at least 1-1/2 (38 mm) K inches of the loop strip

connects to the hook strip, firmly press the hook and loop

strips together to secure the adjustable heel loop around

the lower footrest tube.

4. If necessary, repeat STEPS 1-3 to adjust the remaining

adjustable heel loop.

60101876-C

WARNING!

Risk of Minor to Serious Injury

Pinch points can cause minor to serious injury.

-Be mindful of potential pinch points and use caution

when using this product.

1. Lift up the armrest A.

2. Loosen the jam nut B.

3. Adjust the socket screw C up or down to the desired arm

angle position.

4. Tighten the jam nut.

5. To determine the same angle for the opposite armrest,

count the exposed threads after the jam nut has been

9 Service

Table of Contents