Securing The Occupant; Wheelchair-Anchored Belts - Invacare Captain's Seat User Manual

6.13 Securing the Occupant

6.13.1 Wheelchair-Anchored Belts

WARNING!
Risk of Injury, Damage or Death
Lack or improper use of wheelchair transport
systems may result in injury, damage or death.
-Use both pelvic and upper torso belts.
-The pelvic belt that is provided by Invacare has
been tested for use in a motor vehicle on this
wheelchair only. Do not replace the pelvic belt with
a different style pelvic belt.
60101876-C
The wheelchair has been provided with a pelvic belt which
meets the requirements of ANSI/RESNA WC/19.
The pelvic belt provided by Invacare has been designed to
accommodate use on either side of the vehicle.
1. Install the pelvic belt pin A into large end of slot B in the
belt mounting bracket C. Pull upwards until it snaps into
place. Rotate downward and forward until it snaps into
place into the small end of the slot.
There are two pin locations E on the pelvic belt
that are used to secure the vehicle-anchored
torso belt.
2. Repeat step 1 for the opposite belt mounting bracket.
3. Install the vehicle-anchored upper torso belt onto the two
pin E locations on the pelvic belt.
6 Transport - ANSI/RESNA WC-4 Section 19
45