Table of Contents
Advertisement
Hardware Installation Checklist—Intel
2.0
Hardware Installation Checklist
This section provides an overview of the hardware installation procedures. Detailed
steps are found in
The following steps summarize the basic hardware installation procedure:
1. Check that the HFI hardware is appropriate for your platform. See
16.
2. Check to see that you have the appropriate cables and switches, as described in
Cabling and Switches
3. Following the safety instructions in
HFI
(Unpacking Information
4. Install the HFI by following the instructions in
5. Cable the HFI to the switch, as described in
22. Check that all switches are configured.
6. Follow the steps in
installation.
NOTE
For information on upgrading HFI firmware, please refer to the Boot Server Upgrade
section of the Intel
April 2020
Doc. No.: H76466, Rev.: 8.0
®
Omni-Path Fabric
Hardware Installation
on page 16.
on page 16.
Safety with Electricity
on page 17) and verify the package contents.
Completing the Installation
®
Omni-Path Fabric Software Installation Guide.
Table 1
on page 17. Unpack the
Hardware Installation
Cabling the HFI to the Switch
on page 22 to finish the
®
Intel
Omni-Path Host Fabric Interface
on page
on page 19.
on page
Installation Guide
15
Advertisement
Table of Contents
