RAYLASE SUPERSCAN II-10 Manual page 26

Data Sheet
SUPERSCAN IIE
General Specifications
Voltage
Current
Power Supply
Ripple
Noise
Ambient Temperature
Storage Temperature
Humidity
Interface
Signals
1) Drift per axis, 2) after warming-up, variations of ambient temperature < 1K, 3) SS-IIE-LD, SS-IIE-HS-LD Options
Aperture Dependent Specifications – Mechanical Data
Input Aperture [mm]
Beam Displacement [mm]
Weight, without objective [kg]
Dimension (mm) (L x W x H)
Aperture Dependent Specifications – Dynamic Data
Tuning
Acceleration Time [ms]
1), 2)
Writing Speed [cps]
1)
Positioning Speed [m/s]
1) With F-Theta Lens f=160 / field size 110 mm x 110 mm, 2) Single-stroke font with 1 mm height.
Water Tempering Specifications
Specifications
1)
Water
Temperature
Pressure
(1) Caution: When using cooling water including deionised water, suitable additives must be used to prevent the growth of algae and pro-
tect the aluminium parts against corrosion.
Additive recommendations: Standard industrial applications e.g. CCL105 (NALCO)
Food & beverage, packaging applications: e.g. polypropylene glycol (Dow Chemical)
Please consult your additive supplier for dosage information
Mirrors & Objectives
Scan mirrors and objectives with optimized mounts are available for all typical laser types, wavelengths, power densities, focal lengths and
working fields. Customer specific configurations are also possible. Please contact the RAYLASE support team for specific information and
possible combinations on +49-8153-8898-0 or email
Tuning
LN Low noise Tuning
W Short acceleration time tuning
03/2013
±15 to ±18 V
3.0 A, RMS, max. 10 A
Max. 200 mVpp, @ 20
MHz bandwidth
+15 to +35 °C
-10 to +60 °C
≤ 80 % non-condensing
Digital XY2-100 Protocol
SS-IIE-LD-15
L N
≤ 0.55
-
> 6
Clean tap water with additives
22-28°C
2-5 bar
support@raylase.de
2-Axis Subsystems for Laser Beam Deflection
Typical Deflection
Resolution
Repeatability RMS (for low noise tuning)
1)
Max. Gaindrift
1)
Max. Offsetdrift
1), 2)
Long-term Drift over 8 hours
Long-term Drift over 24 hours
SS-IIE
15.0
18.3
ca. 3.7
170 x 125 x 126
SS-IIE-HS-15
L N W
≤ 0.40 ≤ 0.24
> 450 > 615
> 7 > 9
Flow rate
2 l / min
4 l / min
6 l / min
±0.393 rad
12 µrad
1 µrad
50ppm/K
30 µrad/K
< 150 µrad
1), 2),3)
< 100 µrad
SS-IIE-HS-LD-15
LN
≤ 0.40
> 450
> 7
Pressure loss
0,3 bar
0,4 bar
0,7 bar
W
≤ 0.24
> 615
> 9