Status Leds - RAYLASE SUPERSCAN II-10 Manual

Chapter 2
2.7
The status LEDs allow you to check important functions and statuses on the deflection unit.
They are located on the front or on the top of the deflection unit (depends on type).
LED arrangement
10 RAYLASE 2-Axis Laser Beam Deflection Units

Status LEDs

Name Color
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
Meaning
Red CLK fault
Red Parity fault X
Red Parity fault Y
Green Temp. status X
Green Temp. status Y
Orange New data X
Orange New data Y
Red Fault X
Red Fault Y
Green +VCC
Green -VCC
Basic information
Data transmission faulty.
Cable defective.
Temperature status available if
LEDs are lit.
Transfer new data if status
LEDs are lit.
Galvanometer scanner or
driver electronics defective.
Power supply defective if sta-
tus LEDs are flickering.
Power supplies available if
LEDs are lit.
MN051_v1.0.5