Xerox 4520 User Manual page 198

D i s p l a y e d C o n t r o l P a n e l M e s s a g e s
Figure 7.2 Control Panel messages (continued)
Message
Warning 400/B5
Warning 400/C10
Warning 400/C5
Warning 400/DL
7-24 4 5 2 0 / 4 5 2 0 m p U s e r ' s G u i d e
This message appears in PCL when the printer has changed resolution to 400 or
page protection to B5; appears in PostScript when the page size is B5 and the
printer has changed resolution to 400.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job starts.
ACTION: None
This message appears in PCL when the printer has changed resolution to 400 or
page protection to C10; appears in PostScript when the page size is C10 and the
printer has changed resolution to 400.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job starts.
ACTION: None
This message appears in PCL when the printer has changed resolution to 400 or
page protection to C5; appears in PostScript when the page size is C5 and the
printer has changed resolution to 400.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job starts.
ACTION: None
This message appears in PCL when the printer has changed resolution to 400 or
page protection to DL; appears in PostScript when the page size is DL and the
printer has changed resolution to 400.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job starts.
ACTION: None
Description/Action