Xerox 4520 User Manual page 143

• Paper trays
A variety of trays may be ordered separately for the
4520/4520mp printers. See Chapter 2: Handling Paper,
"Paper Trays" (page 2-9).
• Ethernet network interface card. Factory-installed on the
4520mp.
The Xerox Network Interface Card-Ethernet
(XNIC-E'NET) supports the Novell, TCP/IP, EtherTalk,
DecLat, and LAN Manager protocols and is equipped
with both BNC and RJ-45 connectors.
If using a 4520mp printer, refer to the Networking:
Ethernet (XNIC-E'NET) Installation and Configuration
Guide. Also, see Chapter 3: Using the Control Panel,
"Ethernet Menu Options" (page 3-52).
• LocalTalk card
The Xerox Network Interface Card-LocalTalk
(XNIC-L'TALK) supports the AppleTalk protocols and is
equipped with a DIN-8 connector.
See Chapter 3: Using the Control Panel, "LocalTalk Menu
Option" (page 3-51).
• Token Ring card
The Xerox Network Interface Card-Token Ring
(XNIC-T'RING) supports the Novell and LAN Manager
protocols and is equipped with both RJ-45 and female
DE-9 connectors.
See Chapter 3: Using the Control Panel, "Token Ring
Menu Options" (page 3-55).
• Font card
Font cards are inserted into one or both of the font card
slots in the printer. Font cards hold additional PCL fonts.
See Chapter 1: Introduction (page 1-3) for font card slot
location.
C h a p t e r 5 : A d d i n g P r i n t e r O p t i o n s
O v e r v i e w
5-3