Setup The Omniber 720 Sonet Rx To Retrieve Overhead Monitor Bytes - Agilent Technologies OmniBER 720 Manual

Setup the OmniBER 720 SONET Rx to retrieve
Overhead Monitor Bytes
The following commands can be used to retrieve the OmniBER 720 SONET
Receiver's Overhead Monitor byte values.
Table 7-16 OmniBER 720 SONET Rx Overhead Monitor
Comment SCPI Command
Retrieve the D1 byte
FETCh:SCALar:DATA:TELecom:SONet:OVERhead? 1,1,D1
in STS-3 #1
Retrieve the M1 byte
FETCh:SCALar:DATA:TELecom:SONet:OVERhead? 3,1,M1
in STS-3 #3
Retrieve F2 byte in POH of
FETCh:SCALar:TELecom:SONet:POVerhead? F2
selected STS-3
Retrieve J1 trace in POH of
FETCh:STRing:DATA:TELecom:SONet:J1?
selected STS-3
7-18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Ref.
3-90
3-90
3-90
3-88