Table of Contents
Advertisement
Remote Control Commands
Remote Control Commands
The remote control commands in this manual have been grouped into Sections that
relate to instrument functions. These have then been split into Subsystems
The Subsystems used in the OmniBER 720 are listed in table 2-2.
Table 2-2
SCPI Subsystems
Instrument Functions
To control Optical SIGNAL OUT port.
To control instrument coupling.
To control the transmitter.
To control the Optical SIGNAL IN.
To control the receiver, results and graphics
To obtain results directly accumulated by the instrument.
To control the instrument OTHER functions.
To control Status Reporting.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Subsystem
:OUTPut
:INSTrument
:SOURce
:INPut
:SENSe
:FETCh
:SYSTem
:STATus
2-5
Advertisement
Table of Contents
