Table of Contents
Advertisement
SOURce subsystem - Transmitter SONET OVERHEAD SETUP
characters. The pattern repeats every 16 characters and is transmitted character by
character in subsequent frames.
The corresponding query returns the value of the user defined pattern as a string, as
defined above. If the string contains any non printing characters, ~ is substituted.
If FIXed was returned in response
to:SOURce:DATA:TELecom:SONet:OVERhead:J0:PATTern?, this query
command is not valid.
:SOURce:DATA:TELecom:SONet:OVERhead:J0?
:SOURce:DATA:TELecom:SONet:OVERhead:J0:HEXadecimal?
Returns a 15 byte block of data. Each byte represents the hexadecimal value of an
ASCII character "00" to "FF". The 15 hexadecimal numbers are preceded by the
header "#215".
If FIXed was returned in response to
:SOURce:DATA:TELecom:SONet:OVERhead:J0:PATTern?, this query command
is not valid.
:SOURce:DATA:TELecom:SONet:TRIButary:POVerhead:J2:PATTern
<discrete>
Sets the type of pattern that is to be transmitted in the J2 byte of the VT-6, VT-2 or
VT-1.5 path overhead. The pattern repeats every 16 characters and is transmitted
byte by byte in subsequent frames.
The corresponding query returns the type of pattern being transmitted in VT-6 or
VT-2 path overhead byte J2 in discrete form as listed above.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Returns:
Returns:
<discrete> =
DEFault
TEST
USER
FIXed
<string>
<block>
15 NULL characters
GB (Serial Number)
User Defined
Fixed Byte
4-27
Advertisement
Table of Contents
