Client Workstations And System Software; Supported Hardware And Operating Systems; Client Software - Xerox 180 System Overview Manual

SYSTEM OVERVIEW

Client workstations and system software

Supported hardware and operating systems

Client software

1-4
To send print jobs to DocuPrint NPS, the customer needs to provide
the proper client hardware, operating system, and network software.
Xerox DocuPrint supports the following types of networked client
workstations and operating systems:
•
Sun Workstation running Sun operating system
•
PC running MS-DOS 6.2 and Microsoft Windows 3.1,
configured for the network environment
•
PC running Windows 95/98, configured for the network
environment
•
PC running Microsoft Windows NT, configured for the network
environment
•
PC 386 or 486, running MS-DOS, version 6.2, with one of the
following TCP/IP packages:
— PathWay Access 3.1, Wollongong Integrated Networking/
Transmission Control Protocol (WIN/TCP) for DOS, release
6.0
— FTP software, PC-TCP, release 3.0 or higher
— Sun Personal Computer–Network File Services (PC-NFS),
version 5.1
•
IBM RS/6000 running IBM AIX, version 4.1
•
HP/Apollo running HP-UX, version 10.01
•
DECStation 5000/200 running DEC Ultrix, version 4.3
•
Apple Macintosh, System 7, 7.5, or 8.x, using AppleTalk
through EtherTalk, phase 1 or 2
•
Any system that supports RFC-1179 lpr/lpd.
DocuPrint software may be compatible with workstation models and
software versions other than those listed above.
On your PC or workstation, you must install or set up a supported
means of submitting jobs to DocuPrint NPS. Depending on your
system, you can use the following:
•
Xerox drivers for Windows 3.x, 95/98, or NT
•
Xerox Document Submission software for DOS, Windows 3.x,
95/98, NT, or Macintosh
•
Third-party drivers; some PostScript drivers can be used in
conjunction with Xerox-supplied PPD files
•
Third-party TCP/IP lpd utility
•
Apple/Macintosh Printer Access Protocol (PAP)
XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE