Xerox Phaser 1235 User Manual page 47

Envelopes
1.
Prepare each envelope by tucking in the envelope flap.
2.
Insert the envelopes (maximum capacity is 10):
a.
Short end enters first.
b.
Side to be printed is face-up.
c.
Make a test print from your application to determine the
correct orientation of your envelope.
3.
Adjust the Multi-Sheet Bypass Feeder (MBF) guides for the width
of your envelopes.
4.
Open the Face-up output bin at the rear of the printer.
5.
Set the front panel to match the media type loaded in the MBF.
a.
From the front panel, press the Menu buttons to scroll to
Tray Menu.
b.
Press the Item buttons to scroll to MBF Type.
c.
Press the Value buttons to scroll to Envelope; press Enter to
save your selection.
User Guide
0730-32
0730-33
31