Xerox Phaser 1235 User Manual page 11

Place the printer on a level, solid surface with adequate strength for the weight of
the machine. The base printer weight without any packaging materials is 51 kg
(113 pounds).
The printer is heavy, and must be lifted by two people. The illustration below
shows the proper technique for lifting the printer.
Exercise care in moving or relocating the printer, it is front-heavy and could tip
forward. Follow the recommended procedure when moving the printer from one
location to another. Refer to the Phaser 1235 Setup Instructions.
Do not place any liquids on the printer.
Warning
Be careful when working in areas inside the printer identified with a
warning symbol. These areas may be very hot and could cause personal
injury.
Wait 10-15 seconds between switching the printer off and on.
Keep hands, hair, neckties, etc., away from the exit feed rollers.
While printing, do not remove:
the media source tray that you have selected in the driver or front panel
any trays above the currently selected media source tray.
51 kg
113 lbs.
0730-01
0730-02