Horizon Fitness BQ-150 Manual page 33

3.Maintenance
3-4 Roughening Cutter Replacement
9.
Place 3 pieces of paper (62 gsm)between
the roughening guide and edge of the
cutter and loosen the locking screw on the
cutter. Position the cutter so that the
cutting edge just touches the paper and
then secure the roughening cutter with the
locking screw.
10
. Remove the roughening guide and
paper,and then refit the roughening
guide,checking that the edge of the cutter
does not touch the roughening guide.
11.
Refit the cover and then replace or reverse
the other roughening guide.
28