Using Setip; Installing Setip - Xerox PHASER 3435 User Manual

2

Using SetIP

• Installing SetIP

• Using SetIP
Installing SetIP
1
Make sure that the printer is connected to your computer
and powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing "X" with the
letter which represents your drive and click OK.
3
Click Install SetIP Utility(Optional).
4
Click Next.
5
Click Next.
6
Click Finish.
Using SetIP
1
From the Windows Start menu, select Programs or All
Programs
SetIP.
The program automatically detects and displays new
and configured print servers on your network.
2
Select the name of your printer and click
cannot find your printer name, click
the list.
N :
OTES
To confirm the MAC address, see the NETWORK PRINTER
•
CARD TEST PAGE. The NETWORK PRINTER CARD TEST
PAGE will be printed after the Configuration Page.
• The refreshed list doesn't show your printer, click
your network printer card's IP address, subnet mask, default
gateway, and then click Apply.
3
Click OK to confirm the settings.
4
Click Exit to close the SetIP program.
11
Using SetIP
your printer driver name SetIP
. If you
to refresh
enter