Printing On Both Sides Of Paper; Printing A Reduced Or Enlarged Document; Fitting Your Document To A Selected Paper Size - Xerox PHASER 3435 User Manual

Printing on Both Sides of Paper

You can print on both sides of a sheet of paper. Before printing,
decide how you want your document oriented.
The options are:
• Printer Setting, if you select this option, this feature is
determined by the setting you've made on the control
panel of the printer.
•
None
• , which is the conventional layout used in
Long Edge
book binding.
• , which is the type often used with calendars.
Short Edge
2
3
3
2 5
5
s Long Edge
• Reverse Duplex, allows you to select general print
order compare to duplex print order.
N
:
OTE
• Do not print on both sides of labels, transparencies,
envelopes, or thick paper. Paper jamming and damage to the
printer may result.
• To use double-sided printing, you can use only the following
paper sizes: A4, Letter, Legal, Oficio and Folio, with a weight
of 20~24 lbs (75~90 g/m²).
1
To change the print settings from your software
application, access printer properties. "Printing a
Document" on page 12.
2
From the Layout tab, select the paper orientation.
3
From the Double-sided Printing section, select the
binding option you want.
4
Click the Paper tab and select the paper source, size, and
type.
5
Click OK and print the document.
2
3
2 5
3
5
Short Edge
s
20
Advanced Printing
Printing a Reduced or Enlarged
Document
You can change the size of a page's content to appear larger or
smaller on the printed page.
1
To change the print settings from your software
application, access printer properties. See "Printing a
Document" on page 12.
2
From the Paper tab, select Reduce/Enlarge in the
Printing Type drop-down list.
3
Enter the scaling rate in the Percentage input box.
You can also click the
4
Select the paper source, size, and type in Paper Options.
5
Click OK and print the document.
Fitting Your Document to a
Selected Paper Size
This printer feature allows you to scale your print job to any
selected paper size regardless of the digital document size. This
A
can be useful when you want to check fine details on a small
document.
1
To change the print settings from your software
application, access printer properties. See "Printing a
Document" on page 12.
2
From the Paper tab, select Fit to Page in the Printing
Type drop-down list.
3
Select the correct size from the Output size drop-down
list.
4
Select the paper source, size, and type in Paper Options.
5
Click OK and print the document.
or button.