Related Manuals for CDA FF821SC
Summary of Contents for CDA FF821SC
- Page 1 FF821SC Freestanding full height fridge Installation, use and maintenance www.cda.eu...
-
Page 2: Table Of Contents
Contents: Important information Before first use Important safety notes Important notes on use of the fridge Important notes on first use and general usage Fridge layout and storage Control panel layout Setting the temperature Super cool mode Eco mode Safety key lock Screen saver mode Timer function Mute function... - Page 3 Appliance information: Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes. Appliance Model Serial Number...
-
Page 4: Important Information
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH WEEE DIRECTIVE 2012/19/EU. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. - Page 5 Important This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Page 6 be provided on the rating plate) you must take care during trans- portation and installation to prevent the cooling system elements from being damaged. R600a is an environmentally friendly and natural gas, but is explosive. In the event of a leak due to damage to the cooling system, move your fridge away from open flames or heat sources and ventilate the room in which the appliance is located for 5 minutes.
-
Page 7: Important Notes On First Use And General Usage
• Thawing frozen foods in the fridge compartment will help to keep the temperature low and save energy. • Never store raw meats above cooked meats or other produce. This will help to prevent juices from raw meat contaminating other foodstuffs. We recommend storing raw meat packages or containers on kitchen roll and changing the roll regularly. -
Page 8: Fridge Layout And Storage
Fridge layout and storage Fig. 1 1 - Control panel 6 - Crisper cover 2 - Circulation fan* 7 - Crisper 3 - Bottle shelf 8 - Adjustable feet 4 - Fridge shelves 9 - Bottle shelf 5 - Chiller compartment 10 - Door shelves *IMPORTANT: Do not block the circulation fan with foodstuffs. - Page 9 Food types and where to store them within the fridge section: Vegetables and fruits - Crisper drawers Red meat - Fridge shelves (lower) White meat & fish - Fridge shelves (lower) Cheese - Door shelves (upper) Butter and margarine - Door shelves (upper) Bottled milk products and yoghurt - Bottle shelf Cooked food - Fridge shelves (upper) Control panel and usage...
-
Page 10: Setting The Temperature
Setting the temperature The default temperature for the fridge at first switch on should be 5°C. To adjust the temperature: • Press the key. The temperature display should start to flash. • Each press of the key should adjust the temperature on the display by 1 degree, with the range available being 2 - 8°C. -
Page 11: Eco Mode
Eco mode This mode stores goods at approx. 5°C, consuming minimal energy. It offers the best balance between food storage and energy consumption. • Press the key repeatedly until the eco symbol ‘e’ has a box around it. If no button is pressed for a second, the mode will activate. -
Page 12: Timer Function
Timer function The display board has a feature whereby a timer can be set in 5 minute increments up to a maximum time of 30 minutes. • Press the key to activate the timer. Each press increases the time by 5 minutes. The time will be shown on the timer display. This time will flash. -
Page 13: Maintenance, Care And Cleaning
Changing the light bulb If the light bulb in your appliance fails, contact CDA Customer Care using the details on the rear of this manual. This is because LED... -
Page 14: Troubleshooting
• Check the door seal for any kinks, debris or damage. If you notice any, and are unable to resolve the issue yourself, contact CDA Customer Care so that the seal can be replaced. - Page 15 If ice/frost has formed on the back wall of the fridge; • It is normal for some ice droplets and/or frost to form on the back wall of the fridge. This does not constitute a fault with the appliance. • Ensure that no items inside the fridge are in contact with the back wall.
-
Page 16: Fault Codes
Fault codes MEANING REASON ERROR TYPE REMEDY Appears when one or more of the refrigerator Call a service agent for assistance as Failure warnings parts fail or there is a soon as possible. problem in the cooling system. This warning especially appears if there has been a power failure 1. - Page 17 Failure to provide adequate ventilation can lead to increased running costs and (700 with premature failure; it may also invalidate handle) the warranty provided with the product. • The plug should be fully accessible at all times. 1860 • Ensure ventilation openings are kept clear.
-
Page 18: Electrical Information
N.B. Ensure that the plug socket is situated in an easily accessible place. If the power supply cable or plug is damaged, it must be replaced by a CDA authorised agent. If the plug socket does not match the refrigerator plug, it must be replaced by the manufacturer or an authorised service agent in order to avoid a hazard. - Page 19 Storage volume (fridge) Star rating Automatic Defrosting type Climate class T/SN Airborne accoustic noise emissions dB(A) E & O E. All instructions, dimensions and illustrations are provided for guidance only. CDA reserve the right to change specifications without prior notice.
- Page 20 For more information please contact: The Sales Department on 01949 862 010 or email sales@cda.eu Customer Care Department. The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY 01949 862 012 F: 01949 862 003 E: customer.care@cda.eu www.cda.eu...