Table of Contents
Advertisement
Fault codes
ERROR TYPE
SR
LC
HC
LP
E
•
The 'e' on the display board is always on (except when screen
saver is active). THIS IS NOT A FAULT.
•
A constant beeping and no cooling performance from the
appliance suggests a faulty door sensor. Contact Service.
Installation and ventilation
When installing this product we recommend you seek the help
of another individual. This product may have some sharp edges.
Please take care and wear adequate PPE when handling.
This appliance must never be installed close to heat sources such
as heating elements, radiators, ovens and cookers nor installed in
damp places or direct sunlight.
16
MEANING
Appears when one or
more of the refrigerator
Failure warnings
parts fail or there is a
problem in the cooling
system.
This warning especially
appears if there has
been a power failure
for a long period or
when the refrigerator is
Refrigerator
operated for the first
compartment
time. Ideal temperature
is not cold
for the refrigerator
enough
compartment is +4°C
If you see this warning,
your foods are at risk of
spoiling.
Refrigerator
The food will start to
compartment
freeze because the
too cold
temperature is too cold.
Refrigerators switches
"Low voltage"
to standby mode when
Warning
the voltage supply falls
below 170 Volts.
Eco mode
Eco mode is set
REASON
Call a service agent for assistance as
soon as possible.
1. Set the refrigerator temperature
to colder values or set to Super
Cool mode until the compartment
reaches normal temperature.
2. Open the door as little as possible
until the fault clears.
1. Check if the Super Cool function is
switched on.
2. Decrease the refrigerator temperature
value.
This feature prevents the compressor
from damage due to low voltage.
The refrigerator will start operating
automatically when the voltage restores
to the required level.
No fault. See page 11.
REMEDY
Advertisement
Table of Contents
