Firmware Upgrade; Maintenance - Godox AD300Pro Instruction Manual

Firmware Upgrade

● USB connection line is not included in this product. The USB port is a Type-C
USB socket.Type-C USB connection line is applicable.
● As the firmware upgrade needs the support of Godox G3 software, please
download and install the "Godox G3 firmware upgrade software" before upgrading.
Then, choose the related firmware file.
● As the product needs to do firmware upgrade, please refer to instruction manual
of the newest electric version as final.

Maintenance

● Shut down the device immediately should abnormal operation be detected.
● Avoid sudden impacts and the product should be dedusted regularly.
● It is normal for the flash tube to be warm when in use. Avoid continuous flashes if
unnecessary.
● Maintenance of the flash must be performed by our authorized maintenance department
which can provide original accessories.
● This product, except consumables e.g. flash tube, is supported with a one-year warranty.
● Unauthorized service will void the warranty.
● If the product had failures or was wetted, do not use it until it is repaired by professionals.
● Changes made to the specifications or designs may not be reflected in this manual.
- 41 -
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- 42 -