Table of Contents
Advertisement
DC Inverter U-match Series Duct Type Unit
① The pipe connections , drain pipe, power upply wire, and duct for this unit should be prepared
by the installer.
② The unit is designed for rectangular duct connections.
3 Preparing for Installation
3.1 Standard Accessory Parts
The standard accessory parts listed below are furnished and should be used as
required.
No.
Name
1
Wired Controller
2
Screw
3
Hanger
4
Nut with Washer
5
Nut with Washer
6
Nut
7
Washer
8
Insulation
9
Insulation
10
Fastener
11
Sponge
Table 3.1
Indoor Unit Accessories
Appearance
or
3
Q'ty
Usage
To control the indoor
1
unit
To fix the base plate of
wired controller and
2
installation hole of the
wall together
4
To fix the indoor unit
To fix the hook on the
8
cabinet of the unit.
To fix the hook on the
4
cabinet of the unit
To be used together
4
with the hanger bolt for
installing the unit
To be used together
4
with the hanger bolt for
installing the unit
To insulate the gas
1
pipe
To insulate the liquid
1
pipe
4
To fasten the sponge
To insulate the drain
2
pipe
Advertisement
Table of Contents
