Advertisement
B. When Using Junction Box
1. Prepare the optional field-supplied Implanted
Junction Box.
3. Cut away the insulation at the end of the cable and
clamp the M3 solderless terminals (field-supplied).
3. Attach the controller body to the mounted holding bracket.
Be careful not to pinch the cable when attaching it.
4. Peel away the protective film from the liquid crystal display.
6
2. Feed the cable through the conduit tubing in the wall.
Optional M-size
Junction Box
Remove
the protection film.
Optional S-size
Junction Box
M4 Screws
(Field-Supplied)
Connect the terminals.
P5417086
Advertisement
