Advertisement
No.
Items
Optional Function
Setback Activating Temp.
144
rE
for Heat Mode
Setback Activating Temp.
145
rF
for Cool Mode
146
S1
Not Prepared
147
S2
Not Prepared
148
S3
Not Prepared
149
S4
Not Prepared
150
S5
Not Prepared
151
S6
Not Prepared
152
S7
Not Prepared
153
S8
Not Prepared
(*1): Temperatures for Floor Exposed Type & Floor Concealed Types are not offset. Setting temperature are used as
they are.
(*2): The "02", "03", "04" settings may not be available depending on the type of indoor unit.
When connecting multiple indoor units, do separate settings.
(*3): In Case of Duct Type Models
Setting
00
01
02
(Please refer to the Installation Manual for Indoor Unit.)
(*4): Since it depends on the model, please refer to the Service Manual of each model.
(*5): "E1" to "E4": Setting for the total heat exchanger
(*6): If the set temperature is changed and kept within the set time at "F4", the temperature is automatically changed
to "F5" and "F6". (If the set temperature is out of range at "F5" and "F6", it is applied within the upper and lower
limits for the set temperature.)
(*7): Applicable to the fan, cooling and dry operation modes.
(*8): Applicable to the heating operation mode.
(*9): Operation is stopped by pressing the " " (On/Off) button for three seconds.
(*10): When the unit is restarted by the controller, the temperature automatically changes to the setting temperature of
"F5" or "F6".
(*11): Available only for 4-Way Cassette Compact Type, 2-Way Cassette Type, 1-Way Cassette Type.
(*12): Available only for 4-Way Cassette Type, 4-Way Cassette Compact Type, 2-Way Cassette Type, 1-Way Cassette
Type, Ceiling Type.
(*13): Turning "P4" to "01" can select thermistor (sensor) that can show temperature setpoint.
(*14): Function "01" can show up sensor temperature selected by "P3".
18
Individual
RPI-FSN2 Model
Standard (Factory-Setting)
High Static Pressure
Low Static Pressure
Setting
Setting
Condition
00
15.0°C
01
16.0°C
02
17.0°C
03
18.0°C
04
19.0°C
×
10.0°C
05
06
11.0°C
07
12.0°C
13.0°C
08
09
14.0°C
00
26.0°C
01
27.0°C
02
28.0°C
03
29.0°C
04
30.0°C
×
05
31.0°C
06
32.0°C
07
33.0°C
08
34.0°C
09
35.0°C
10
25.0°C
-
-
Not Used (Use as 00 conditions)
-
-
Not Used (Use as 00 conditions)
-
-
Not Used (Use as 00 conditions)
-
-
Not Used (Use as 00 conditions)
-
-
Not Used (Use as 00 conditions)
-
-
Not Used (Use as 00 conditions)
-
-
Not Used (Use as 00 conditions)
-
-
Not Used (Use as 00 conditions)
RPI(M)-FSN3 Model
Standard (Factory-Setting)
High Static Pressure 1
High Static Pressure 2
Contents
Setting
P5417086
Advertisement
