Advertisement
6. Individual Louver Setting
This setting is available only for an indoor unit equipped with just an individual louver.
Each louver angle can be set individually as shown in the following procedure.
1.
Press and hold "Menu" while in the normal mode (when
the unit is in operation).
The menu is displayed.
2.
Select "Individual Louver Setting" from the menu and
press "OK".
The louver setting is displayed.
3.
Select "Individual Louver Setting" from the louver setting
and press "OK".
4.
Select the indoor unit to change the louver direction by
pressing "
(This screen is NOT displayed when the number of
indoor unit connected with the controller is one.
In this case, "5" is displayed.)
5.
Press "
" and select louver direction.
The selected louver is opened and the other louvers are
closed.
6.
Press "Menu" while "Back/Help" is pressed.
The confirmation screen is displayed.
7.
Select "Yes" and press "OK". The setting "5" is displayed
after the setting change is confirmed.
If "No" is selected and "OK" is pressed, the screen
returns to "5".
●
Regarding "Individual Louver Setting", the louver
selected at "5" is set as number "1" and the other
louver number is automatically changed to clockwise
as shown at right.
NOTE:
This "Individual Louver Setting" is NOT available when two controllers are used in the same group.
(including a combination with a Wired Controller + Wireless Controller).
20
" and press "OK".
Menu
Individual Louver Setting
Louver Open/Close
VENTI
Total Heat Exchanger SET
Function 15
Sel.
OK
Entr
Individual Louver Setting
Individual Louver Setting
Cancel INDV Louver SET
Sel.
Entr
OK
Individual Louver Setting
01-01
01-02
01-03
01-04
Select unit to set.
Sel.
Entr
OK
Individual Louver Setting:01-03
1
2
3
Adjust air direction & louver angle.
Sel.
Adj.
Entr
OK
Louver Outlet Setting:01-03
Change louver outlet number?
(2
1, 3
2, 4
3, 1
Yes
No
Sel.
OK
Entr
15:10(Fri)
03
/
05
Back
Rtrn
Rtrn
Back
Rtrn
Back
4
Rtrn
Back
4)
Back
Rtrn
P5417086
Advertisement
