Advertisement
No. / Name
1. NEMA case
2. Supporter
3. Screw
4. Ground contact part of
Nema case
5. Ground contact part
of power point
Caution when using NEMA case
The size of IDTECK's NEMA case is 350mm X 399mm X 100mm (Width X Depth X Height) with
thickness of 1.4mm. When using any third party NEMA Case, make sure that it is metallic
(for conductivity) and has a larger size than IDTECK's NEMA case. Make sure to ground it firmly.
Use the ones with doors to completely isolate the product from outer environment.
HOW TO CONNECT EARTH GND
A NEMA case provided by IDTECK is metallic which will be suitable for the
product. Make sure to use
party.
Make sure to use
metallic
board to EIO88, Nema case to iTDC/iTDC-SR, and NEMA case to power supply
device).
When fixing the product to the NEMA case, make sure to use
Ground contact part is for connecting a plug (Earth GND) to the NEMA case.
Connect Earth wire of NFB using a metallic screw.
A circular lug must be used to tightly fix the screws.
Make sure to use power point with Earth GND connecting piece as shown in the
figure above.
Quick Installation Guide
metallic
NEMA case if you are using one from a third
supporters (Supporter to connect iTDC/iTDC-SR main
5
metallic
screws.
Advertisement
