Suzuki V-Strom DL650 2017 Manual page 99

Mark top dead center
In the position at which the
filter gasket first contacts
the mounting surface.
Tighten the filter 2 turns or to
specified torque.
9. Mark the top dead center posi-
tion on the "cap type" filter
wrench or on the oil filter. Use
an oil filter wrench to tighten
the filter 2 turns or to specified
torque.
Oil filter tightening torque:
20 N·m (2.0 kgf-m, 14.5 lbf-ft)
Oil filter wrench
10.Replace the drain plug gasket
with a new one. Reinstall the
drain plug and gasket. Tighten
the plug securely with a torque
wrench. Pour about 2600 ml
(2.7 US qt) of the specified
engine oil in the filler hole.
(See FUEL, ENGINE OIL AND
COOLANT
TIONS section.)
Drain plug tightening torque:
23 N·m (2.3 kgf-m, 17 lbf-ft)
NOTE: About 2400 ml (2.5 US qt)
of oil will be required when chang-
ing oil only.
NOTICE
Engine damage may occur if
you use oil that does not meet
Suzuki's specifications.
Be sure to use the oil specified
in the FUEL, ENGINE OIL AND
COOLANT
TIONS section.
7-24
RECOMMENDA-
RECOMMENDA-