Suzuki V-Strom DL650 2017 Manual page 119

 WARNING
Failure to extend brake pads
after installing the wheel can
cause poor braking perfor-
mance and may result in an
accident.
Before riding, "pump" the
brake lever repeatedly until the
brake pads are pressed against
the brake disks and proper
lever stroke and firm feel are
restored. Also check that the
wheel rotates freely.
 WARNING
Installing the front wheel in the
reverse direction can be haz-
ardous. The tire for this motor-
cycle is directional. Therefore,
the motorcycle
unusual handling if the wheel
is installed incorrectly.
Install the front wheel so that
the tire rotates in the specified
direction, as indicated by the
arrow on the sidewall of the
tire.
may have
7-44
 WARNING
If the bolts and nuts are not
properly tightened, the wheel
can come off, causing an acci-
dent.
Be sure to tighten the bolts and
nuts to the specified torque. If
you do not have a torque
wrench or do not know how to
use one, ask your authorized
Suzuki dealer to check the
bolts and nuts.
Front axle tightening torque:
65 N·m (6.5 kgf-m, 47.0 lbf-ft)
Front axle holder bolt
tightening torque:
23 N·m (2.3 kgf-m, 16.5 lbf-ft)
Front brake caliper mounting bolt
tightening torque:
39 N·m (3.9 kgf-m, 28.0 lbf-ft)
NOTE: Be careful not to damage
the oil seal when installing the
front wheel.