Table Of Contents; Introduction - Husqvarna K 7000 Chain Operator's Manual

Introduction..................................................................... 2
Safety..............................................................................4
Assembly...................................................................... 10
Operation...................................................................... 11
Maintenance................................................................. 17
Product description
This Husqvarna K 7000 Chain is a portable handheld
cut-off machine. To operate the product, connect the
product to the necessary power pack.
Intended use
This product is used to cut hard material as masonry
and steel. Do not use the product for other tasks.
Product overview
1. Rear handle
2. Front handle
3. Hand guard
4. Transmission cover
5. Guide bar and diamond chain (not supplied)
2
Contents
Troubleshooting............................................................ 21
Transportation, storage and disposal........................... 22
Technical data.............................................................. 23
EC Declaration of Conformity....................................... 25

Introduction

Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Note: National regulations can limit the operation of the
product.
6. Display
7. Power trigger lockout
8. Power trigger
9. Information and warning decal
10. Diamond chain tensioner
1455 - 003 - 03.03.2020