Advertisement

Quick Links

6
Gazebo GZ734
Assembly Instructions
Paragon Group USA
Customer Service:(877) 782 4482 Email:cs-outdoors@paragongroupusa.com

Advertisement

Table of Contents
loading

Summary of Contents for Paragon GZ734

  • Page 1 Gazebo GZ734 Assembly Instructions Paragon Group USA Customer Service:(877) 782 4482 Email:cs-outdoors@paragongroupusa.com...
  • Page 2: Introduction

    Introduction Thank you for purchasing the Gazebo GZ734. When properly assembled and maintained, this gazebo will provide many years of enjoyment! These instructions include helpful hints and important information needed to safely assemble and properly maintain the gazebo. Please read these instructions completely before you begin.
  • Page 3: Table Of Contents

    Safety Advice Table of Contents • The gazebo must be positioned and fixed Introduction..........on a flat level surface. Table of Contents........• Dispose of all plastic bags safely. Keep List of Parts..........them out of the reach of children. Step 1 Assembling the Corner Profiles..
  • Page 4: List Of Parts

    List of Parts The gazebo is shipped in one carton. This carton is heavy. Be careful when lifting it. Wear proper safety gear including work shoes, gloves and goggles. The parts are identified by removable stickers. Place all the parts for each step in staging areas, checking that you have all parts as you go. If any parts are missing or damaged, contact customer service before beginning assembly: Customer Service:(877) 782 4482 Email:cs-outdoors@paragongroupusa.com Profile...
  • Page 5 Part Qty Step Part Qty Step 1/4 x 38 1,2,5 1/4 x 18 Fabric canopy Fabric canopy We included some extra screws and bolts for your convenience. 1,5,6 1/4 x 30 of 18...
  • Page 6: Step 1 Assembling The Corner Profiles

    STEP 1 Assembling the Corner Profiles Place all the parts on a level surface . Make sure the pieces are in the correct positions before assembling. Carefully follow the order of assembly to ensure an easy installation. Wear proper safety gear including work shoes, gloves and goggles. Components Bolt (17) Bolt (14)
  • Page 7 Slide support frames (2) over lower end of corner profiles (1). Attach support plates (3) to corner profiles as shown, using two bolts (17) for each plate. Leave support frames (2) about 10”over lower end of corner profiles (1) until step 4. of 18...
  • Page 8: Step 2 Assembling The Roof Profiles

    STEP 2 Assembling the Roof Profiles Connect each roof profile (4A) to one roof profile (4B) by sliding protruding parts on profile (4A) into open side of profile (4B) as shown. Fasten with bolts (14). Components Bolt (14) x 12 Wicker strap (18) Roof connector (12) x 12...
  • Page 9: Step 3 Attaching The Roof Profiles To Corner Profiles

    STEP 3 Attaching Roof Profiles to Corner Profiles Attach one long roof profile set (4A+4B) to two corner profiles (1) as shown. Fasten with four bolts (13) on each side. Components NOTE : The end of profile (4B) protrudes from corner profile (1) the distance of it’s own width.
  • Page 10 Using at least 3 people, attach the two other roof profile sets (4A+4B) to corner profiles (1), connecting all four corner profiles (1). Fasten with four bolts (13) on each side. IMPORTANT: After this step you should place the gazebo frame in its desired location. Make sure all corners are squared at 90 degrees.
  • Page 11: Step 4 Securing The Gazebo To The Ground

    STEP 4 Securing the Gazebo to the Ground Fasten the gazebo frame to the ground, using four spikes (21) for each support plate. Lower support frames (3) to cover support plates (2). Components Ground spike (21) x 16 Optional Securing the Gazebo to a Concrete Floor or Wood Deck Concrete Floor: Components 1.
  • Page 12: Step 5 Attaching The Corner Roof Gables

    STEP 5 Attaching the Corner Roof Gables IMPORTANT: The roof gable profiles (5) have small protrusions (spring buttons) underneath. The end with the protrusions is connected to the top gable connector (10). The roof gable extension (6A) has a small protrusion underneath which will snap into one of the holes in roof gable extension (9) while stretching the canopy.
  • Page 13 Connect two roof gable profiles (5,6) to top gable connector (10) until the small protrusion on their undersides snap into the holes on the underside of top gable connector (10). ATTENTION: The tunnels of top gable connector (10) are marked, in order to avoid mistakes when inserting the roof gable profiles.
  • Page 14 Using at least two people, slide the other two roof gable profiles (5,6 - 5,6A) into tunnels of top gable connector (10) until the small protrusion on their undersides snap into the holes on the underside of top gable connector (10). ATTENTION: The tunnels of top gable connector (10) are marked, in order to...
  • Page 15: Step 6 Attaching The Center Roof Gables

    Slide roof gable extension (9) over roof gable extension (6A) until the small protrusion on it’s underside snaps into the third hole on the underside of roof gable extension (9). 30.1” 25.4” 11” 30.1” NOTE: You will need to extend profile (9) outwards to stretch the roof canopy into its final position. STEP 6 Attaching the Center Roof Gables IMPORTANT: The roof gable profiles (8) have small protrusions (spring buttons)
  • Page 16: Step 7 Placing The Canopy

    Place the other ends of roof gable connectors (8) into roof connectors (12) on roof profiles (4B), align drill holes and fasten with bolts (17,15). STEP 7 Placing the Canopy WARNING!! : When inserting the roof profiles into the fabric pockets of the canopy, you MUST use both hands holding the large piece of roof fabric in order to stretch it.
  • Page 17 Using at least two people, place the large canopy (23) carefully over the small canopy (22) and three roof gable profiles (5,6) as shown. Stretch the canopy and slide profiles into fabric pockets in large canopy rim (23). Use TWO hands to pull the fabric backward until the roof profiles slide firmly into the pockets.
  • Page 18 Gazebo GZ734 Assembly Instructions WARRANTY: Warranty covers damage due to manufacturing defects only. Warranty does not cover weather damage (Force Majeure) and/or damages caused by not following assembly instructions and adhering to warnings in manual. WARNING : In order to prevent possible damage to fabric and/ or structure,fabric roof should be removed before wind storms, or major incement weather events.

Table of Contents