Table of Contents
Advertisement
Contents
1. Contents .............................................................................................1
2. Technical features of MES150 ..................................................................1
3. Adhesive of MES150...............................................................................1
4. Working norms for the operator.................................................................2
The two functions of the brakes.............................................................2
The forward/backward/swivel of the stacker.............................................2
Lifting and lowering of the forks.............................................................2
Load of the stacker.............................................................................2
The steps of unloading the goods............................................................2
5. Recharge of Battery.................................................................................3
6. Daily Maintenance Battery........................................................................3
7. Programmed Maintenance........................................................................3
8. Spare parts of the lifting parts....................................................................4
9. spare parts of the forks.............................................................................4
10. Circuit diagram of the MEC200..................................................................4
Advertisement
Table of Contents
Related Manuals for Noblelift MES150
Summary of Contents for Noblelift MES150
-
Page 1: Table Of Contents
Contents 1. Contents …………………………………………………………………………………1 2. Technical features of MES150 …………………………………………………………1 3. Adhesive of MES150…………………………………………………………………….1 4. Working norms for the operator………………………………………………………..2 The two functions of the brakes…………………………………………………….2 The forward/backward/swivel of the stacker………………………………………2 Lifting and lowering of the forks…………………………………………………..2 Load of the stacker…………………………………………………………………..2 The steps of unloading the goods……………………………………………………2... -
Page 2: Technical Features Of Mes150
1. TECHNICAL FEATURES MODEL MES150 Capacity Lifting height(h1) 1550 Min .fork height Fork width 330/520 Wheels Q’ty Lifting speed Without load 83mm/s, with full load 70mm/s Lowering speed Without load 85mm/s, with full load 101mm/s Battery 7 Ah/12v Φ75*32 Front wheel Φ100*32... -
Page 3: Working Norms For The Operator
The adhesive label on the stacker must be always legible. Do not use the stacker for purpose except lifting or lowering load. Do not make casual repair. If repaired by unprofessional people, the safety modulus of the machine could be altered. In case damage happens, repair it in the local place according to the instruction or contact to us. -
Page 4: The Steps Of Unloading The Goods
(6) Lower the load slowly. C. Platform (be fitted for the lifting the load with small volume) (1) Drive close to the load. (2) Lift the platform to a proper position (be convenient for people to stack the goods) (3) Transfer the goods to the platform artificially. (4) Lower the platform. -
Page 5: Programmed Maintenance
7. PROGRAMMED MAINTENANCE In the following we show a table in which there are some tips about the programmed maintenance done by the authorized operators. Before starting the maintenance you have to: 1. Put the stacker on an even and solid surface. 2. -
Page 6: Spare Parts Of The Forks
10123 Micro switch 10152 Screw M3*10 10124 Inner round screw 10153 Ass’y of alnico M8*20 10125 Flat washer 8 10154 Alnico Fitted frame 10126 Roller frame 10155 Screw M6*12 10127 Locking nut 10156 Screw M6*30 10128 Inner screw M8*25 10157 Locking nut M6 10129 Inner screw M6*16...
Need help?
Do you have a question about the MES150 and is the answer not in the manual?
Questions and answers