Table of Contents
Advertisement
OPERATING INSTRUCTION HANDBOOK
MANUAL SCISSOR LIFT PALLET TRUCK/
ELECTRICAL SCISSOR LIFT PALLET TRUCK WITH ELECTRIC
LIFTING
WARNING
Do not use the truck before reading and
understanding these operating instructions.
NOTE:
Please check the designation of your present
•
type at the last page of this document as well
as on the ID-plate.
Keep for future reference.
•
Version 06/2013
ACX-SMS-001
Advertisement
Table of Contents
Related Manuals for Noblelift ACX 10E
Summary of Contents for Noblelift ACX 10E
- Page 1 OPERATING INSTRUCTION HANDBOOK MANUAL SCISSOR LIFT PALLET TRUCK/ ELECTRICAL SCISSOR LIFT PALLET TRUCK WITH ELECTRIC LIFTING WARNING Do not use the truck before reading and understanding these operating instructions. NOTE: Please check the designation of your present • type at the last page of this document as well Version 06/2013 as on the ID-plate.
- Page 3 FOREWORD Before operating the scissor lift pallet truck, read this ORIGINAL INSTRUCTION HANDBOOK carefully and understand the usage of the truck completely. Improper operation could create danger. This handbook describes the usage of a scissor lift pallet truck with manual or electric lifting function. When operating and servicing the truck, make sure, that it applies to your type.
-
Page 5: Table Of Contents
Replacement ....................15 Battery indicator ..................... 16 Charging with Onboard charger (only ACX 10E, optional)......16 Charging with external charger (only ACX 10E, optional) ......17 8. REGULAR MAINTENANCE .................. 17 9. TROUBLE SHOOTING ..................19 10. HYDRAULIC FLOW DIAGRAM AND CIRCUIT DIAGRAM........21 Hydraulic flow diagram .................. -
Page 7: Correct Application
1. CORRECT APPLICATION It is only allowed to use this scissor lift pallet truck according to this instruction handbook. This truck is a manually operated scissor lift pallet truck with manual or electric lifting function designed for transporting of palletized loads, or to be used stationary as a working platform on level ground. It is not suitable for use in potentially explosive locations and hostile environments. -
Page 8: Description Of The Scissor Lift Pallet Truck
2. DESCRIPTION OF THE SCISSOR LIFT PALLET TRUCK Main components (10) (11) (12) Fig.1: Overview Chassis Lifting button Tiller arm Key switch Hydraulic cylinder and manual pump Hydraulic power pack Steering wheel (10) Emergency plug Scissors (11) Battery (inside) Control lever (12) Onboard charger (optional) -
Page 9: Main Technical Data
Main technical data Fig. 2: Technical data Table 1: Main Technical data for standard version/ other version on request Technical data sheet for industrial trucks acc. to VDI 2198 Manufacturer`s type designation ACX 10E ACX 10M Drive electric manual Operator type... -
Page 10: Description Of The Safety Devices And Warning Labels
Fig.3: Safety and warning labels Crane hook label Sticker to read and follow these instructions Operating instruction sticker Lifting sign (only ACX 10E) Warning decal: Do not step under or on the forks Never reach through Load diagram Identification plate The safety and warning labels should be placed according to figure 3. -
Page 11: Identification Plate
Identification plate 1 Type 2 Serial number If sold to the EU, here the 3 Rated capacity place of the CE marking 4 System voltage 5 Net weight with/without battery 6 Name and address of the manufacturer 7 Battery mass min/max 8 Nominal power 9 Load center distance 10 Manufacturing date... -
Page 12: Commissioning, Transporting, Storage/ Reassembling
Practice maintenance work according to regular Inspection. This truck is not designed to be water resistant, therefore use it in dry atmospheres. 4. COMMISSIONING, TRANSPORTING, STORAGE/ REASSEMBLING Commissioning – Tiller assembling After receiving our new scissor lift pallet truck you may have to do following before firstly operating the truck: •... -
Page 13: Hydraulic Valve Adjustment
The draw-bar is now assembled to the pump. For the ACX 10E connect the control cable. Fix the cable at the pump side in a way that the cable holder can be turned. Fix the cable before the plug with the pre assembled cable strip. -
Page 14: Lifting/Transporting
Lifting/ Transporting Lifting DEDICATED CRANE LIFTING EQUIPMENT DO NOT STAND UNDER THE SWAYING LOAD DO NOT WALK INTO THE HAZARDOUS AREA DURING LIFTING Park the truck securely and lash the truck according to the Fig. 10: Lifting with a crane points identified in fig. -
Page 15: Operating Instructions
6. OPERATING INSTRUCTIONS • When operating the truck, the operator has to wear safety shoes. • The truck is intended to be used for indoor applications with ambient temperatures between +5°C and + 40°C. • The operating lighting must be minimum 50 Lux. •... -
Page 16: Quick Lift (Acx 10M)
Inform immediately the manager and, or call your service. 7. BATTERY CHARGING AND REPLACEMENT (ACX 10E) • Only qualified personnel are allowed to service or charge the batteries. The instructions of this handbook and from the battery- manufacturer must be observed. -
Page 17: Battery Indicator
Charging with Onboard charger (only ACX 10E, optional) • The attached automatic charger is only available for the optional voltage of 110V or 220V as referred. -
Page 18: Charging With External Charger (Only Acx 10E, Optional)
When charging is finished, disconnect the connector from the socket and place it in the designated pocket. Charging with external charger (only ACX 10E, optional) The fully automatic external charger uses pulse charging. It can effectively alleviate the phenomenon of cell polarization, extend the service life of battery and has fast charge, slow charge and float charge functions. - Page 19 • Use approved and from your dealer released original spare parts. • Please consider that oil leakage of hydraulic fluid can cause failures and accidents. • It is allowed to adjust the pressure valve only from trained service technicians. • Waste material like oil, used batteries or other must be probably disposed and recycled according to the national regulations and if necessary brought to a recycling company.
-
Page 20: Trouble Shooting
Check and refill hydraulic oil • Ensure forks are in lowered position. • Lay pallet truck on either side. Position drain plug of hydraulic cylinder up. • Remove the screw plug. • Add hydraulic oil until level of oil is at bottom of hole. •... - Page 21 defective Hydraulic pump does not work • • Leakage in the hydraulic system • Replace the seal • Lowering valve does not close any • Clean or replace the valve Raised load is more or the valve unit is not sealed •...
-
Page 22: Hydraulic Flow Diagram And Circuit Diagram
10. HYDRAULIC FLOW DIAGRAM AND CIRCUIT DIAGRAM Hydraulic flow diagram N E U T R A L L O W E R IN G L IF T IN G Fig.16:Hydraulicdiagram(electric) Circuit diagram (ACX 10E) FU1=160A FU2=5A Fig.17: Electric diagram onboard charger FU1=160A FU2=5A... -
Page 23: Specialized Stipulations For The Us- American Market
11. SPECIALIZED STIPULATIONS FOR THE US- AMERICAN MARKET The content in this chapter is specialized for the US-American market. Foreword/ Compliance Operating this truck requires knowledge which can be acquired from this instruction handbook. This handbook must be kept available throughout the entire period of use of the truck. YOU MUST BE TRAINED AND CERTIFIED TO OPERATE THIS TRUCK! READ AND OBEY ALL WARNINGS AND INSTRUCTIONS IN THIS MANUAL AND ON THE TRUCK! Only properly trained operators are allowed to operate a powered industrial truck. -
Page 24: Description Warning Labels (Only Us-Market)
ACX 10E only ACX 10E) ACX 10M M (inside apron, only ACX 10E) Combined emergency battery plug (only ACX 10E) Fig.19: Decals for the US-market Crane hook sign Identification plate(ID-Plate) Sign read and follow this instructions Truck identification plate number... - Page 25 Decals on your truck according to chapter 2c: Crane hook sign (A) Sign warning electrical devices (J, only ACX 10E) Sign read and follow this instruction (B) Sign danger battery (K, only ACX 10E) Sign operating instruction (C) Sign caution charger (L, only ACX 10E)
-
Page 27: Declaration Of Conformity (Valid, If Sold Within The Eu)
12. DECLARATION OF CONFORMITY (valid, if sold within the EU) [GB] CE Declaration of Conformity The signatory hereby declares that the specified machine conforms to the EU Directive 2006/42/EC (Machine Directive) and 2004/108/EEC (Electro-Magnetic Compatibility, EMC) including their amendments as translated into national legislation of the member countries. The signatory is individually authorized to compile the technical documents. - Page 28 Ar zemāk redzamajiem parakstiem tiek apliecināts, ka norādīts mašīna atbilst Eiropas Savienības normatīvām 2006/42/EG (Mašīnu normatīvas) un 2004/108/EWG (Elektromagnētiskā atbilstība – EMV), ieskaitot to izmaiņas, kā arī atbilstošos tiesiskos rīkojumus normatīvu pielāgošanai nacionālajai likumdošanai. Parakstu īpašnieki ir atsevišķi pilnvaroti sastādīt tehniskās dokumentācijas. [N] EU-KONFORMITETSERKLÆRING Undertegnede bekrefter hermed at de enkelte betegnede maskin med kraftdrift tilsvarer de europeiske retningslinjene 2006/42/EC (maskinretningslinje) og 2004/108/EEC (elektromagnetisk fordraglighet - EMV) inklusiv disses endringer og den tilsvarende rettsforordning til...