Noblelift ETF-30 Operating Instructions Manual
Battery powered lift table
Hide thumbs
Also See for ETF-30:
- Operating instructions manual (9 pages) ,
- Instruction handbook manual (20 pages)
Related Manuals for Noblelift ETF-30
Summary of Contents for Noblelift ETF-30
- Page 1 Operating Instructions Parts List BATTERY POWERED LIFT TABLE Note: Owner and operator MUST read and understand this operating instructions before use this lift table.
- Page 2 ， BEFORE OPERATING THE LIFTER READ THIS MANUAL CAREFULLY ， AND UNDERSTAND COMPLETELY KEEP THIS MANUAL ON FILE FOR ， ， FUTURE REFERENCE IF THIS IS LOST PLEASE CONTACT YOUR ， LOCAL SUPPLIER FOR A NEW COPY IF THE WARNING/CAUTION ，...
- Page 3 2. CAUTION (1.) Read this manual carefully and understand completely before operating lifter. Improper operation could create danger. (2.) This lifter is a movable lifter designed to lift or lower rated load on table. Do Not use lifter for other purpose than its intended use. (3.) All lifter service must be performed by qualified personnel only.
-
Page 4: Daily Inspection
3.DAILY INSPECTION Daily inspection is effective to find the malfunction or fault on lifter. Check lifter on the following points before operation . CAUTION DO not use lifter if any malfunction or fault is found (1.) Check for scratch, bending or cracking on the lifter. (2.) Check if there is any oil leakage from the cylinder. - Page 5 4. OPERATING LIFTER 4-1 How to use the brake CAUTION Brake lifter when not moving it in order to prevent sudden movement. The brake is equipped with the swivel caster on the right. (1.) Braking the wheel, press the brake pedal. (2.) Release the brake, lift up the brake pedal.
-
Page 6: Charging The Battery
5. MOVING LIFTER CAUTION DO NOT move lifter on slope or inclined surface.Lifter may become ● uncontrollable and create danger. DO NOT allow other person stand in front of or behind lifter when it is moving. ● DO NOT move lifter when table is in raised position. Load could fall down. ●... -
Page 7: Regular Inspection
7. REGULAR INSPECTION 1.) Check the items emphasized in daily inspection (daily). (2.) Lubricate with grease the rails where roller moves. Also lubricate the grease nipples (monthly). (3.) Lubricate all the pivoting points and axles (every 6 months). (4.) Replace the hydranlic oil (every 12 months). 8. - Page 8 9. SPECIFICATIONS Model ETF-30 ETF-50 ETF-75 ETF-35/D Capacity (kg) Table Size (mm) 850x500 1010x520 1000x510 910x500 Max Table Height (mm) 880 1025 1300 Min Table Height (mm) Dimensions (mm) 1145x485x920 1305x520x970 1345x600x936 1205x485x920 LxWxH Vertical Travel (mm) Lifting Motor (DC24V KW)
- Page 9 10. WIRING DIAGRAM/ HYDRAULIC CIRCUIT...
-
Page 10: Parts List
11.PARTS LIST ETF35... - Page 11 Part List Of fork Description Quantity Description Quantity Handle Grip Switch seat Control switch Bolt Voltage indicator Cylinder Switch Bolt Hood Switch Bolt 141D Table Bolt Retaining Ring Bolt Roller Washer Oil pipe Roller 90°curve Pump Unit Bushing Plug Retaining Ring Washer Elastic Washer Retaining Ring...
- Page 12 Description Quantity Description Quantity Nipples O - Ring Seal Washer Piston Rod Safety Valve Dust Ring Retaining Ring O - Ring Y - Seal Cylinder Cap Piston Cylinder O - Ring...