Speakman S-3470 Instructions

INSTRUCTIONS FOR MODELS
S-3470
For additional assistance or service please contact:
SPEAKMAN
®
Company
400 Anchor Mill Road
New Castle, DE 19720
800-537-2107
customerservice@speakmancompany.com
www.speakmancompany.com
92-S-3470-R1
TOOLS AND SUPPLIES
Slip Joint Plumber's
Wrench Putty
IMPORTANT
SAFETY TIPS
Be sure to wear eye protection.
MAINTENANCE
Your new Faucet Drain is designed for years of
trouble-free performance. Keep it looking new by
cleaning it periodically with a soft cloth. Avoid
abrasive cleaners, steel wool, and harsh chemicals
as these will dull the finish and void your warranty.
WARRANTY
1 Year Limited Warranty
Additional warranty information can be found at:
www.speakmancompany.com
1
Remove Mounting Nut (1), Metal Washer
(2), and Sealing Washer (3) from Drain
Assembly.
2 Apply included Upper Drain Seal (1) or
Plumber's Putty to the underside of the
Upper Flange. Insert Drain Assembly into
drain hole of sink from above.
3
From below, install Sealing Washer (3),
Metal Washer (2), and secure with
Mounting Nut (1). Tighten with Slip Joint
Pliers. Take care to not over-tighten
connection.
4 Test Drain operation by pressing down on
Stopper to open/close Drain.