Vaillant sensoHOME VRT 380f Operating And Installation Instructions page 12

2 Product description
2.11.2 INFORMATION menu item
MENU → INFORMATION
→ Current temperatures
→ Zone
→ DHW temperature
→ Water pressure: bar
→ Burner status:
→ Control elements
→ Menu introduction
→ Competent person contact info
→ Serial number
2.11.3 -- SETTINGS menu item
MENU → SETTINGS
→ Installer level
→ Enter access
code
→ Competent per-
son contact info
→ Service date:
→ Fault history
→ Installation con-
figuration
→ Screed drying
→ Change code
→ Language, time, display
→ Language:
→ Date:
→ Time:
→ Display brightness:
→ Daylight saving
time:
For outdoor temperature sensors with DCF77 receivers, the Daylight saving time: function
is not used. The conversion to summer/winter time takes place via the DCF77 signal. The
change takes place:
– On the last weekend in March at 02:00 (daylight saving time)
– On the last weekend in October at 03:00 (standard time)
10
Explanation of the control elements
Explanation of the menu structure
Access to the installer level, factory setting: 00
Entering contact details
Enter the next service date for a connected component, e.g. heat gen-
erator
Faults are listed in chronological order
Functions (→ Installation configuration menu item)
Activate the Screed drying profile function for freshly laid screed in
accordance with the construction regulations.
The control regulates the flow temperature independently of the out-
door temperature. Setting screed drying (→ Installation configuration
menu item)
After the power is switched off, the date is retained for approx. 30
minutes.
After the power is switched off, the time is retained for approx. 30
minutes.
→ Automatic
→ Manual
Operating and installation instructions sensoHOME 0020298974_00