Husqvarna 525LST Operator's Manual page 3

9. Throttle trigger lockout
10. Spark plug cap and spark plug
11. Cylinder cover
12. Starter rope handle
13. Fuel tank
14. Air filter cover
15. Air purge bulb
16. Choke control
17. Locknut
18. Support flange
19. Drive disc
20. Combination wrench
21. Hex key
22. Locking pin
23. Operator's manual
24. Support cup
25. Blade
26. Shaft coupling (525RJD)
27. J-handle (525LST, 525RJD )
28. Handle adjustment
29. Suspension ring (525RS)
30. Throttle wire adjustment (525RS)
31. Start throttle button (525RS)
32. Harness
33. Transport guard
34. Handlebar (525RS)
35. Trimmer head (525LST)
36. Trimmer line (525LST)
37. Suspension ring (525LST, 525RJD)
Symbols on the product
WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Maximum speed of the output shaft.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Use approved protective gloves.
1363 - 001 - 25.10.2019
Use heavy-duty slip-resistant boots.
The product can cause objects to eject,
which can cause injury.
Keep a minimum of 15 m distance to
persons and animals during operation of the
product.
Risk of blade thrust if the cutting equipment
touches an object that it does not
immediately cut. The product can cut off
body parts.
Only use flexible cutting wire. Do not use
metal cutting attachments.
Only use flexible cutting wire. Do not use
metal cutting attachments.
Noise emissions to the environment
according to European Directive 2000/14/EC
and New South Wales legislation "Protection
of the Environment Operations (Noise
Control) Regulation 2017". Noise emission
data can be found on the machine label and
in the Technical data chapter.
The arrows show the limit for the handle
position.
Choke.
Air purge bulb.
yyyywwxxxx
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
The rating plate shows the
serial number. yyyy is the
production year, ww is the
production week.
3