Explanations - Becker Centronic VarioControl VC420 Operating Instructions Manual

Operating Instructions

Explanations

Centronic VarioControl VC420
4034 200 007 0
230V/50Hz/4VA
Outputs
Connect the drive to the outputs of the device. The arrows on the device indicate
the running direction of the drive.
Light/drive
A bridge connection between L and the encoding terminal light/drive allows the
running time to be increased from 120 seconds to infinity.
Venetian blind/roller shutter
A bridge connection between L and the encoding terminal venetian blind/roller
shutter allows the receiver to be controlled in non-maintained command mode.
Press and hold the control command button for more than 1 second to move the
blind in maintained-command mode.
Individual inputs
If you press one of the up or down buttons of the maintained switch for more than
0,5 seconds, the blind/shutter will move automatically in the chosen direction to
the final position. If you touch it for less than 0,5 seconds, the blind/shutter will
move and stop again immediately.
18