SEA VELA Installation Manual

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
INSTALLATION MANUAL
Thank you for choosing a SEA s.r.l. product. This choice will give you
the opportunity to understand that our company aims at combining
high-tech and remarkable reliability and safety, thanks to studies,
research and the accurate analysis of our customers' needs, without
undermining the simple use and installation of our products.
General features
VELA is an electro-mechanical barrier (2, 3, 4, 5 m) recommended for
the automation of access points which require a high opening/closing
speed (parking lots, motorways, airports, etc.) and frequent use
features.
The automation comes with an anti-squeezing
through by pass valves for the regulation of the force which doesn't
exceed 15 kg on the beam, protecting people and things from possible
accidents. A system of hydraulic deceleration (on request) guarantees
the total control of the present inertial force in case of lack of power
supply and a release system allows the manual opening in case of
emergency.
The automation system is composed of the following elements:
1 Adjustable mechanical stop
2 Manual release with DIN key
3 Galvanised steel rocker arm
4 VELA, casing cover with lock and DIN key
5 Balancing spring
6 Electronic control unit GATE 1 (code 23001120/1), a complex device which can be used to program and manage all
the operation and safety systems
7 Fixation plate out of galvanized steel
8 Hydraulique unit
9 Roller bearing
10 Cataphoresis-treated and polyester painted VELA casing, for outside, protects all included mechanical and
electronic devices from fire, flood, lightning, etc.
Predisposed for the application of photocells GHOST 40, key switch Key Plus, proximity reader Reader Prox.
Stainless steel casing available on request.
Cod. 67410035
®
safety system
1 1
2 2
3 3
8 8
5 5
10 10
6 6
7 7
Rev 06 - 06/2010
4 4
9 9
English
15