HITEC RDX2 Mini Instruction Manual page 6

Warning and Safety Notes [cont.]
•
A battery tted with an integral charge circuit or a
protection circuit
•
A battery pack which consists of di erent types of cells
(including di erent manufacturer's cells)
•
A battery that is already fully charged or just slightly
discharged and non-rechargeable batteries (these pose
an explosion hazard)
•
A faulty or damaged battery
•
Batteries installed in a device or which are electrically
linked to other components
•
Batteries that are not expressly stated by the
manufacturer to be suitable for the currents the charger
delivers during the charge process
PLEASE BEAR IN MIND THE FOLLOWING POINTS BEFORE YOU
COMMENCE CHARGING:
•
Did you select the appropriate program suitable for the type of
battery you are charging?
•
Did you set up the adequate current for charging or
discharging?
•
Have you checked the battery voltage? Lithium battery packs
can be wired in parallel and in series, i.e. a 2-cell pack can be
3.7V (in parallel) or 7.4V (in series).
•
Have you checked that all connections are rm and secure?
•
Make sure there are no intermittent contacts at any point in
the circuit.
6