HITEC RDX2 Mini Instruction Manual page 18

Charger Operations
It is highly recommended to have the owchart handy while learning
to operate this charger. There are two main ways to setup the charger:
(1) Memory pro le are available for setting and storing charge or
discharge parameters for up to 10 di erent batteries. Once a battery's
information is stored into memory, it will be retained until changed
again manually. Recalling a battery's memory number makes the
charger instantly ready to go!
(2) The other method is by manually setting up the charge or
discharge process each time. The RDX2 Mini is capable of the
following processes:
Batt Operation
Type Program
BALANCE
LiPo
LiHV
CHARGE
Lilon
LiFe
STORAGE
CHARGE
NiMH
NiCd
RE-PEAK
NORMAL CHG
AGM CHG
Pb
COLD CHG
18
This mode is for balancing the voltage of lithium-polymer battery cells while
charging.
This charging mode is for charging LiPo/LiHV/LiFe/LiIon battery in normal mode.
This program is for charging or discharging lithium battery which will not be
used for long time.
The charger will charge NiMH and NiCd batteries using the charge current
set by the user.
In re-peak charge mode, the charger can peak charge the battery once,
twice or three times in a row automatically. This is good for confirming the
battery is fully charged, and for checking how well the battery receives fast
charges.
This mode is for charging Pb battery.
This mode is for charging AGM battery.
This mode is for charging Pb battery in cold days when the temperature is
5 ℃ to -20 ℃.
Description