System Start Up Using Wireless Remote; General Operation; Special Functions - Lennox MS8 Manual

System Start Up Using Wireless Remote

General Operation

1 - Press POWER button once to turn system on.
2 - Press MODE button until desired operating
mode icon is displayed.
NOTE - When AUTO mode is selected, the
temperature setting is not displayed on the
remote control. The - and + buttons cannot be
used to make temperature setting selections.
3 - Press - or + buttons until desired temperature
setting is displayed.
NOTE - Skip this step in AUTO mode.
4 - Press FAN button until desired fan speed icon
is displayed.
NOTE - Fan speed will be set to low if
DEHUMIDIFICATION
5 - Press LOUVER SETTING button
indoor unit directional louver. Press once to
activate full range oscillation. Press more than
once to scroll through and select one of five
fixed positions or one of three other oscillating
positions. If function is activated when unit
powers off, preferred setting will be activated
again when unit operation is restored.

Special Functions

6 - Press SLEEP button to initiate sleep function.
Then press TIMER OFF button to set timed
off.
7 - Use TIMER ON and TIMER OFF buttons to
schedule desired timed on and off settings.
8 - Use LIGHT button to set display light on or
off.
9 - Use BLOW button to turn on and off extended
fan operation feature.
10-Use TURBO button to turn accelerated fan
speed on or off.
11-Use I FEEL button to use temperature sensor
in remote control (rather than return air
sensor in indoor unit) to initiate cooling and
heating demands.
mode has been selected.
to control
1
4
11
9
10
6
8
3
2
5
7
8