Leak Testing - Shut Down Procedure; Burner Flame Check - Coleman COOKOUT 36" GRIDDLE STATION Safe Use & Care Manual

LIGHTING INSTRUCTIONS
Shut Down Procedure
1. Push in and turn each burner control knob CLOCKWISE to the "OFF" position ( See image A ).
A
OFF / FERMÉ
HI
LOW
MAX
MIN
MED / MOY
2. Turn LP Cylinder shut-off valve clockwise to close ( See image B ).
RESOLVING BURNER ISSUES
ATTENTION
Once lit, confirm that the burner is properly lit and that the flame pattern is as desired. If the
flame pattern is other than normal, consult the troubleshooting guide for corrective action.

Burner Flame Check

The burner flame pattern is the key indicator of proper
or improper function within the cook system. When the
burners are performing correctly, you will see a specific
flame pattern. All burner ports should be 2.5cm/1"
flame on "HIGH" with orange tips, light blue center,
with dark blue flame at the base of the burner port
( See image C ). Refer to the troubleshooting steps.
Light the burners and rotate the knobs from "HIGH" to
"LOW". You should see a smaller flame in low position
than seen on high. Perform burner flame check by
looking below the griddle top on the side of the unit to
view the burners below. Always check the flame before
each use. If there is a sudden drop or low flame issue,
please refer to the troubleshooting section.
OFF / FERMÉ OFF / FERMÉ
HI
LOW
HI MAX
MIN
MAX
MED / MOY MED / MOY
OFF / FERMÉ
HI
LOW LOW
MAX
MIN MIN
MED / MOY
C
8
B
High
Low