Leak Testing; Operation - Lighting Instructions - Coleman COOKOUT 36" GRIDDLE STATION Safe Use & Care Manual

LEAK TESTING

1. Turn all control knobs to "OFF".
2. Ensure that the regulator is securely connected to LP cylinder.
3. Spray soapy solution onto hose and regulator and all connections
from the LP tank to the main and side burner manifold.
4. Open LP cylinder valve by turning hand wheel counterclockwise. If
you hear a rushing sound, turn gas off immediately. There is a leak
at the connection. CORRECT BEFORE PROCEEDING.
5. If "growing" bubbles appear, there is a leak. Close LP cylinder
valve immediately and re-tighten connections. If leaks cannot be
stopped do not try to repair. Call for replacement parts. Order
new parts by providing the serial number, model number, name
and part number of items required (see parts list) to a COLEMAN®
CUSTOMER CARE AGENT 1-800-275-4617.
6. Always close LP cylinder valve after performing leak test by turning hand wheel clockwise.
ATTENTION
Leak Test must be repeated each time the LP cylinder is exchanged or refilled.
• Do not smoke during leak test.
• Do not use an open flame to check for gas leaks.
• The Griddle station must be leak tested outdoors in a well ventilated area, away from ignition
sources such as gas fired electrical appliances.
ATTENTION
If there is excessive abrasion or wear, or the hose is cut, the hose and regulator must be replaced.
Prior to operation.
WARNING
This Coleman Cookout Griddle Station is sold propane ready, and is not convertible to natural
gas. Any attempt to convert this griddle station will void the manufacturers warranty.
LIGHTING INSTRUCTIONS
WARNING
Before you light this griddle station, turn all control knobs to the off position and close the
LP Cyclinder. Failure to follow proper lighting sequence will activate the regulators "FLOW
LIMITING DEVICE" feature, and require a reset (See page 5).
Lighting - COOKOUT™ Burners
1. Turn all burner control knobs "OFF". (Push in and turn the knobs
clockwise to confirm "OFF" position.)
2. Open LP tank SLOWLY. Turn counter clockwise to open. Wait 5
seconds for pressure to stabilize.
6
OFF / FERMÉ
HI
LOW
MAX
MIN
MED / MOY